For The Forever Sparkling SANITARYWARE

 

Maintaining a sanitary ware may seem like a havoc but following these easy guidelines won’t just make them last longer, but also keep the style factor intact. Because nothing should take away the charm of your sparkling bathroom.

  • Replace the wax ring every 5 years to seal the connection and prevent waste & odour leakage.
  • Do not strike the surface of water closets as they are prone to scratches, chips and cracks.
  • Inside of the bowl should be thoroughly scrubbed with a brush or household bleach.
  • Water closet should be securely fastened to the floor, to avoid wobbling.
  • Maintain the gloss finish of ceramic products by cleaning with warm soapy water.
  • Check the water closet regularly for any signs of external leakage.
  • Disinfect toilet bowl seat lid tank and surface with a disinfectant spray, once in a month.
  • Clean regularly so that soluble salts don’t buildup on glazed surface.
  • Do not use strong cleaners bleaches or acids.
  • Keep the area around closet clear, to easily find the water shut off valve in an emergency.
  • Use a soft cloth rinsed with clean water to dry and polish the surface.

For The Forever Sparkling Faucets

 

The eye often goes to the faucet as one of the signs of cleanliness in a home. Not to forget, a freshly cleaned faucets that shines in the light can make your bathroom look like it’s worth a million! Take a look at these tips to make the task of cleaning and maintaining them, a lot easier and simpler.

  • Use mild soap solution to keep the chrome surface clean and free from deposits.
  • Give special attention to regular cleaning in coastal areas.
  • Clean the overhead tank at least once in a month.
  • Don’t use harsh acids coarse cleaning powders, household cleaners or hard scrubbers.
  • Do not let cleaners sit or soak on surfaces
  • For showers without Rub IT System clear the nozzles by using hindware Cleaning Liquid and a soft brush
  • To clean the blocked nozzles in RUB IT Showers turn on the water, and rub the nozzles with a wet finger.
  • Prevent scaling by regularly cleaning the edges and using softener for harsh water.
  • Use a strainer at the outlet of overhead tank to prevent damage of internal fitting parts.